KL1512 BUS TERMINAL

SKU

Designed for straightforward tallying operations with pulse speeds up to 1 kHz (e.g., interfacing with flow meters), the KL1512 Bus Terminal features a pair of bidirectional counters. It safely transmits counting data across an electrically isolated boundary directly to your primary control system.

Input signals drive each dual-channel pulse reader, while software registers allow you to toggle the direction between incremental and decremental counting. Integrated status LEDs give immediate visual feedback for incoming signals on all channels.

Category

COUNTER MODULES

Highlights

Connection technology 2 x up or down counter
Specification EN 61131-2, type 1, “0”: < 5 V DC, “1”: > 15 V DC, typ. 5 mA
Number of counters 1 or 2
Nominal voltage 24 V DC (-15%/+20%)
Signal voltage “0” -3…+5 V (EN 61131-2, type 1)
Signal voltage “1” 15…30 V (EN 61131-2, type 1)
Counting frequency max. 1 kHz
Counter depth 16 bit
Input current typ. 5 mA (EN 61131-2, type 1)
Current consumption K-bus typ. 50 mA
Current consumption power contacts load only
Electrical isolation 500 V (K-bus/field potential)
Bit width in the process image input/output: 16 bit data, 8 bit control/status
Configuration via the Bus Coupler or the controller
Special features set counters
Weight approx. 50 g
Storage temperature -40…+85°C
Operating temperature -25…+60°C
Relative humidity 95%, no condensation
Vibration/shock resistance conforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emission conforms to EN 61000-6-2/EN 61000-6-4
Protect. rating/installation pos. IP20/variable
Pluggable wiring level for all KSxxxx Bus Terminals
Approvals/markings CE, CCC, UL, ATEX, IECEx, cFMus
Ex marking ATEX:
II 3G Ex ec IIC T4 Gc
IECEx:
Ex ec IIC T4 Gc
cFMus:
Class I, Division 2, Groups A, B, C, D
Class I, Zone 2, AEx ec IIC T4 Gc